Talking about the importance of deburring machine

Here's why deburring machines are important:

1: The impact of burrs on the performance of components and the performance of the whole machine.

1. The influence on the wear of parts, the larger the burr on the surface of the part, the more energy is consumed to overcome the resistance. If there are burrs, there will be a fit deviation. The rougher the fit part per unit area, the greater the pressure on the unit area, and the easier the surface is to wear. Therefore, a deburring machine and a polishing machine are required for deburring.

2. Corrosion resistance. After the surface treatment of the parts, the burrs are easy to be touched and fall off, which will damage the surface of other accessories. At the same time, a new surface without surface protection will be formed on the burr surface. Under humid conditions, these surfaces are easier to Corrosion and mildew occur, thus affecting the corrosion resistance of the whole machine. Therefore, a deburring machine and a polishing machine are required for deburring.

Two: The impact of burrs on subsequent processes and other processes.

1. If the burr of the reference surface head is too large in one processing, it will lead to uneven machining allowance.

The uneven material retention causes the spindle cutting amount to increase or decrease sharply due to the excessive burr, resulting in knife lines or machining stability on the cutting stability. Therefore, a deburring machine and a polishing machine are required for deburring.

2. If there are burrs on the fine datum surface, the datum surface is easy to overlap, resulting in inaccurate processing dimensions. Therefore, a deburring machine and a polishing machine are required for deburring.

3. In the surface treatment process, such as spraying, the coated metal first gathers on the tip of the burr (static electricity is easier to adsorb), which leads to the lack of plastic powder in other parts, resulting in unstable quality. Therefore, a deburring machine and a polishing machine are required for deburring.

4. The burr is easy to bond during the heat treatment process, which often destroys the interlayer insulation, resulting in a significant decrease in the AC magnetic properties of the alloy. Therefore, when heat treating some special materials such as soft magnetic nickel alloys, the burrs must be removed first. Therefore, a deburring machine and a polishing machine are required for deburring.

Three: The importance of deburring. Therefore, a deburring machine and a polishing machine are required for deburring.

1. Reduce and avoid the presence of burrs that affect the positioning and widening of mechanical parts and reduce machining accuracy.

2. Reduce the scrap rate of workpieces and reduce the risk of operators.

3. Eliminate the wear and failure of mechanical parts caused by uncertain burrs during use.

4. The adhesion of burr-free mechanical parts will increase when painting, so that the coating texture is uniform, the appearance is consistent, smooth and tidy, and the coating is firm and durable.

5. Mechanical parts with burrs are prone to cracks during heat treatment, reducing the fatigue strength of the parts, and deburring of parts under load or high-speed running parts cannot exist.